One more time.

I bought a Legacy 40 kit and I'm in the process of building it. I plan to power it with an electric motor and instead of carving the blocks for the fuselage top I'm molding them out of 1/16 balsa. I used 1/8 balsa for the fin/rudder instead of the 3/16 balsa that comes with the kit. I lightened the elevators and the cowl. I plan to run the elevator pushrod out of the fuselage under the stabilizor so it will be easy to adjust.I'm not sure about lightening the flaps as they are pretty hard balsa. After adjusting the controls properly in all the other planes they are flying very well.