When I got the trophy McCoy .19 running I had to build a plane for it. I made up some ribs and put together a 30 inch wing of 221 square inches of area. The fuselage is totaly designed by the T.L.A.R. method or "That Looks About Right". The tail is from the Vector 40 but cut down. I bent the landing gear wire like the older kits had. One piece that was installed through the wing cut out in the fuselage before the wing was installed. I forgot that part today and had to force the gear into position with the wing glued in first. The gear went in without messing things up. The nose is drilled for the .19 engine and the O.S. LA .25 and FP.20 will fit into the rear bolt holes. The front holes interfeer with the McCoy's front holes so I installed two inserts to be uses with a strap to hold the .20 and .25 engines in place if needed. I plan to fly it off the cul de sac circle next to my house. I have to get some Spider wire fishing line or equivilent rather than use up some valuable .015 cables to make the short lines. The finish will be my usual style using Brodak butyrate dopes and clear and thinner like I did on the "Wild Thing".