Rainy day stuff.

  It started off quite innocently. I was working on the new plane and then got the idea to change the landing gear set up on the Banshee. After all was said and done I had bent wire for a trike gear set up and painted the spats. I flew it today and it flys great. Very stable and has a good turn. I removed a bit of nose weight from the Ringmaster 576 and it has a better corner than before. I'm on a roll. The new plane is nearing the tissue paper installation process. I'm going to use poly urethane thinned with alcohol as it's not smelly like dope.

Contest report.

 On Sunday I got a long look at the Classic score board and it didn't look right. My fears were affirmed when one of the officials said he had to re-calculate the scores.
  The winds were very light and shifting around. I was first up in my class and got 485 points. After the first round I was in first place. I didn't figure that would hold up after the second round as several others had put up pretty good first flights. The second round was closer but my 492 was 3.5 points ahead of the second place finisher.
  That class win put me in the fly-off for the Mass Cup. All the class winners fly again and the best flight wins the cup. I was flying my scratch built PT-73 that I've had for a long time. It was my back-up plane at Lee, Ma but didn't see action because of the winds. I figured I owed it a shot at a contest as it's been flying for several years. I put up over 100 flights between Lee and Wrentham. The engine ran very well and it beat several much better planes both electric and fuel powered. One of the planes we beat was the $3500.00 Shark/electric that was up after me at Lee but didn't fly. I only got 8 appearance points but the Shark being an RTF didn't get any. Anyway I walked away with a first place in Classic, after re-tabulating, a first in AMA Stunt and the Mass Cup plus Best Classic Model.
 Over the winter I plan on re-finishing the PT-73.

  I started my first winter project and have it framed up and the wing installed into the fuselage. I made wing mounted gear and am carving the top block and canopy now. I installed an r/c type firewall and motor mount as it's said to be lighter than the all wood crutch normally used. I bought a wing kit from Brodak and will use the only piece usable from the Pathfinder wreck, the stab/elev. This is the first plane built on the old dining room table I inherited.

Wrentham contest.

The wind started to blow early this morning. Nothing since the Lee, MA contest. I got to the site about 0900 and the others were already talking about the wind. My first flight wouldn't get off the ground. The tail kept coming up and grounding the prop. After 4 attempts it finally got airborne. I got into the overhead eights when the fuel ran out. I knew it would be short because of the many attempts. I bent the tail wheel wire to lower the tail and it helped on the second flight. I got a full flight in and got applause after landing. I also got 502 points for first place in Classic stunt. It's the same pattern as normal stunt but with older design planes. It's blowing pretty good even now. Tomorrow should be much better conditions. Regular stunt classes too. I flew the Ruffy with the Fox .35 I won in the raffle at Lee.

The doldrums.

Ever since the hurricane at the Lee, MA contest the winds have been very light and almost non existant. A real pain when you need some wind to hold the plane out on the lines and blow the turbulance away.
I moved all the branches to the other side of the garage and then figured I could run the small stuff through the shredder. I cut all the finger size branches off the big stuff and the shredder did the rest.
Some time in the fall I will burn the pile and the remaining branches.
 I called Brodak and ordered a wing kit for the plane I have drawn up. It's based on the plane that crashed and will use it's stab/elev. Full fuselage and inverted engine with an r/c motor mount.

Another present.

We got home from New London at 1230. I looked out a little while later and saw branches sticking out from the end of the garage to the bird house. We didn't notice them when we drove into the yard. I went to investigate and found a large limb had broken off of a Maple tree. More work. I got the chain saw out and started to cut branches. The chain was old and not that sharp and wouldn't cut into the thick part of the branch which is over a foot. I made a few phone calls and found a place on rte. 6 that could make up a chain. With that installed the saw came alive and made short work of the limb. Now to find someone that wants the wood and get a chipper for the branches.  In the second picture of mostly leaves you can see the broken limb on the tree. Above that limb is a broken limb that fell several years ago. There's my beer can in the last photo.

Deer 3, Ma 0.

Nuff said. This one's out for revenge after the rocket attack last week.

Deer 2, Ma 0.

Nuff said.