Hold everything.

I saw a thread on a forum about the Legacy, probably not the 40 version. It showed the elevators and they were built up not solid like the plans I have show. I cut out a strip from the center of each half and put in ribs to lighten the weight a bit. Then I installed the straw on the ball link and removed the push rod in preparation to install the wing into the fuselage. I noticed that I hadn't cut the hinge slots in the wing so I removed it and re installed the push rod for safety's sake.While the wing was in I got a measurement for the long push rod and glued the "L" bend end into the carbon tube. The picture shows the tapered end on the bellcrank to flap pushrod.