Warm and rainy building weather.

 After school there wasn't anything else to do but build. I semi finished the top deck and the turtle deck on the Legacy. I finished the wing tips and made holes in the control horns that are the right size and the distance from the center as per the plans. I brazed one hole shut and re drilled it the size for the metal clevis .065. I ended up drilling .070 for some side to side movement just in case. The flaps are ready for installation now that the horn slides into brass tubes making the flaps removeable for installation after sliding the wing through the fuselage. I need to do the same to the elevators. I'll add some 1/32 ply over the horns for added strength.